IsoThermLux · All Moldova
Foundation insulationand basement
The cold foundation and the wet basement are the main cause of the mold. We insulate them with polyurethane foam with closed cells — permanent solution.
Areas We insulate
House floor
insulate the socket on the outside or inside. Eliminate the thermal bridge at the level of the floors and reduce moisture in the walls.
The walls of the basement
insulate the concrete walls of the basement on the inside. Dry, warm and mouldless space — usable as a storage room or workshop.
External Foundation
insulation on the outside of the foundation before filling. Thermal and hydro protection at the same time. Definitive solution.
Concrete plate (Partoseala)
insulate under or over the concrete plate. Warm flooring step by step without heating system in flooring.
Underground beams and ceilings
We're removing the thermal bridges at the concrete beams that come out of the building. Critical point of thermal losses.
Wetlands
Where water or vapors are a problem, closed-cell foam completely stops infiltration.
Why Foam with Cells Closed at the Foundation?
Resist the Earth's Pressure
Density 35–45 kg/m³ — is not compressed under the pressure of the earth filler.
Waterproof
Absorbs less than 2% water. The Foundation remains dry even at the high level of the groundwater.
Stick to concrete without adhesive
Foam binds chemically to concrete. It doesn't slip, it doesn't slip, it doesn't leave gaps.
Lifespan identical to building
25+ years without degradation. It must never be restored under normal conditions.
Eliminate critical thermal bridges
The buffer zone is the most common point of loss. Its correct insulation radically changes the thermal behavior of the house.
Reduce invoices by 15–25%
Even partial insulation of the foundation generates visible savings on the first winter bill.
Escape from Wetland and Cold at the Foundation
Free on-site evaluation. We'll show you exactly where you lose heat and how much it costs to fix it.
Call Now: +373 60 811 115